SAE AMS3357 Rubber, Silicone (Vmq), Lubricating Oil and Compression Set Resistant, 65-75
时间:2024-05-02 14:15:21 来源: 标准资料网 作者:标准资料网 阅读:8962
Product Code:SAE AMS3357
Title:Rubber, Silicone (Vmq), Lubricating Oil and Compression Set Resistant, 65-75
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a silicone (VMQ) rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -55 to +230 degrees C (-67 to +446 degrees F), compounded especially for aircraft piston engine oil resistance and low compression set. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
基本信息
标准名称: | 公路沥青路面再生技术规范 |
英文名称: | Technical Specifications for Highway Asphalt Pavement Recycling |
中标分类: |
工程建设 >>
交通运输工程 >>
公路工程 |
ICS分类: |
土木工程 >>
道路工程 >>
道路建筑材料
|
发布部门: | 中华人民共和国交通运输部 |
发布日期: | 2008-04-01 |
实施日期: | 2008-07-01 |
首发日期: | |
作废日期: | |
主管部门: | 中华人民共和国交通运输部 |
归口单位: | 中华人民共和国交通运输部 |
起草单位: | 交通部公路科学研究院等 |
起草人: | 黄颂昌、徐剑、董平如、邹桂莲等 |
出版社: | 人民交通出版社 |
出版日期: | 2008-05-01 |
页数: | 89 |
书号: | 978-7-114-07105-8 |
适用范围
中华人民共和国行业标准--公路沥青路面再生技术规范(JTG F41-2008)一书由人民交通出版社于2008-05-01出版。沥青路面在使用一定时间后,其整体性能将不能满足路用要求,但作为路用材料仍有很高的利用价值。通过路面再生,可以使其重新满足路用性能要求,既可节省大量材料资源和资金,也可避免环境污染,实现循环经济发展模式和可持续发展。
前言
没有内容
目录
1 总则
2 术语、符号
3 原路面调查及分析
4 材料
5 再生混合料设计
6 沥青路面厂拌热再生
7 沥青路面就地热再生
8 沥青路面厂拌热再生
9 沥青路面就地冷再生
附录A 回收沥青路面材料(RAP)取样与试验分析
附录B 厂拌热再生混合料配合比设计方法
附录C 就地热再生混合料配合比设计方法
附录D 乳化沥青(泡沫沥青)冷再生混合料配合比设计方法
附录E 泡沫沥青发泡试验
附录F 再生混合料设计参数参考值
引用标准
没有内容
所属分类: 工程建设 交通运输工程 公路工程 土木工程 道路工程 道路建筑材料
MIL-STD-262, MILITARY STANDARD, TEST AND INSPECTION OF CRANE TRUCK, WAREHOUSE, ELECTRIC SOLID RUBBER TIRES (11 MAR 1957)., This standard covers the testing and inspection of equipment as listed in Specification MIL-C-3988.